A guide to measuring curtains - Furnishing tips: Home ...

Curtains are a must-have in any room. They keep prying eyes out of your home's interior, serve as additional decor, and add a unique elegance to any space. However, to work, they must be measured to a perfect length around the window or wall they are intended to beautify.

To understand how to properly measure your curtains, keep reading. This article will explain how you might be able to measure your own home's curtains. Upon completion, you'll be ready to take on this task on your own at home and at home. exchange them whenever you want.

Decide where to hang the curtains

Before measuring the curtains, you must decide where you are going to mount the curtain rod. This will make a huge difference in the size of the curtain rod and the length of the curtains. Deciding where to place your curtains in advance can save you some trouble. further modifications once the curtains have already been placed.

There are three places curtain rods are mounted that have been around since curtains first became popular years ago. Each style will look different in your room, so make sure what you measure matches your aesthetic. .The three popular locations include:

Inside Trim: This curtain rod position extends inside the window, providing a clean look that matches a modern aesthetic Outside Trim: This is how most curtain rods are pushed a few inches from the trim and even on each side Above the window: if you want a long curtain, placing the rod well above the window is another popular choice

There are two different ways to measure these two items. The rod inside the window has a different way than the ones outside. Read on to see how to measure the length of the curtain rod to hang your curtains effectively .Soon your curtains will be cascading from your ceiling in silent protection.

How to Measure for Curtain Rods

When measuring curtain rods you will need to consider the location. Whether the rod is inside the window or outside will impact the length you should invest in.

If you are placing the rod inside the window, you will need to take the width of the window and apply it to the rod. Use a tape measure and a leveler to make sure you get an accurate length. It should be able to fit snugly inside, with a little wiggle room for removal if needed. There are often rods that can be loosened and tightened.

For a rod outside the window, you need to measure an extra three to six inches on each side. The rod should be between that. This way the curtains can be a little wider than the window and form a feeling of cohesion each time someone enters your space.

How to measure window width

Window width should be measured to ensure you choose a curtain that is wide enough for your space.As a general rule, the wider the curtain, the fuller it will appear when hung in a window.Curtains are not straight , after all. The wider they are, the more they will need to be bent to fit the rod.

There are plenty of tips on the internet regarding measuring the width of a window, but some of them make things more complicated than they should be. There are just a few separate measurements that should be considerations for anyone updating their home. To properly measure a window, you will need to:

Get yourself a tape measure or long, accurate ruler Measure from jamb to jamb on each half of the window Measure the window diagonally on both sides to ensure accuracy Measure the top, middle, bottom, and so on until all sides are measured

The shortest measurement you find should be the width. When selecting a curtain, a medium curtain will be about twice as wide. The further you go, the fuller it will be. curtains are flat. It all depends on the style you are going for in the space you are decorating with curtains.

Measure window height

The height measurement only applies if you have landed on the type of curtain that falls above the window sill. Due to the specifics of this version, it is necessary to know the height of the window. this way you can ensure that your curtains will fall in exactly the right place on your ledge.

When measuring, the method is not complicated. All you have to do is use a tape measure or ruler and measure. You need to go up and down inside the frame and top to bottom outside the frame. From there you should be able to have an accurate measurement to work with.

Measure the length of the curtain

First, you need to decide on the length of your curtains. This length is critical for measurement, as all curtains come in different sizes and shapes. There are several different styles, including:

Drapes over the sill: These drapes sit about an inch above the window sill and are standard in many homes. curtains that fall to the floor, a more elegant look for the average homeowner

To determine curtain length, measure the area between where the rod is located and where you want your curtains to end. This number is the length you need. For the top sill, it will be at about a centimeter above the threshold. For the bottom, aim for about fifteen centimeters below. The curtains on the floor can touch the floor.

Each curtain length has a different style and overall aesthetic, so you'll need to consider whether you prefer longer or shorter curtains. When deciding on your desired curtain length, you should also consider the distance between the place where you hang the curtains and the floor.

Cut your curtains if necessary

Sometimes your initial curtains may be too long. This problem occurs frequently because most curtains are prepared to reach the floor. You will need to measure the amount of excess with a ruler or tape measure. This measurement should be marked with a pen or marker so you can cut the curtain to the required length.

If you need to cut the curtain, you can do so in one of the following ways:

Hem the piece with a sewing machine and thread Take it to a professional for alterations on the bottom Move the curtain rod if it won't damage your wall Pin it with safety pins or another type of pin Remove a tiny bit of the up instead of down

Shortening the curtain is no problem for your measurements. It's better to have it too long rather than too short. Removing is easy to do, but adding is a whole different story. If you need to add to the curtain, you may need to invest in a whole new set of curtains. Adding tacky and disorganized looks.

If you want to avoid the hassle of cutting, you must first determine your initial measurement. Mount your rod, then measure from that point to where you want the curtain to end. There may be a curtain on the market that fits that exact measurement for you.