Example: If your window is 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case, 2 panels will give approximately 100 ″ to 120″ wide, which will be nice and full. Always round up to the next whole number.
People also asked how wide should the curtains be for a 100 inch window?
For example, if the window is 100 inches wide, the curtains should be 125 inches wide so they hang down from the window when in the open position. For an inside mount curtain, measure from edge to edge. the inside of the frame to the inside edge of the opposite side.
Also, how wide should the curtains be for a 120 inch window? I would normally recommend at least one and a half widths - ie each curtain is 180 inches wide. makes it really full. You have to think about how much space you have on each side, because when the curtains are open, they take up space on the side.
do you need 2 curtain panels?
For example, if you have a 28-inch wide panel and a 36-inch curtain rod, purchase two panels for minimum volume, three panels for medium volume, and four panels for extra volume.
You might be wondering: do grommet curtains have to be double width?
You should allow the two flat panels to be at least 1.5 times the width of the curtain rod. Personally, I think they look much better with double the width of the pole. Give or take a few inches. This allows the curtains to have enough fabric to allow the pleats to look good when hung above your window.
How much wider should the curtains be than the window?
How wide should the curtains be? To ensure the panels appear loose and draped when closed, they should be a combined width of 2 to 2 ½ times the width of the window. Exceptions: if hanging curtains just to frame a window and you don't intend to close them, you can round to one and a half times the lower width.
What is the normal length of the curtains?
Curtains and drapery panels are available in standard lengths of 63 inches, 84 inches, 95 inches, 108 inches and 120 inches. Tiered curtains, also known as cafe curtains or kitchen tiers, are available in 24 inch lengths and 36 inches. Panel widths vary by style and manufacturer, but 54 inches is a standard width.
What are the standard curtain widths?
The most common prefabricated lengths are 63, 84, 95, 108, and 120 inches. Widths vary, but most are 45 inches wide. More than one panel is usually needed to cover standard window designs. Long panels of drapery that come down to the floor.
How wide should the curtains be for a 40 inch window?
Example: If your window is 40" wide (window width x 1.5 = minimum width needed / x 3 = maximum width needed) you should need one curtain (or set/pair of curtains) between 60" and 120 wide to cover the width of your windows and get its proper appearance.
How wide should the curtains be for a 60 inch window?
Example: For a 60 inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered must each be at least 42 inches wide.
How wide should the curtains be for a 72 inch window?
Example: If your window is 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case, 2 panels will give approximately 100 ″ to 120″ wide, which will be nice and full. Always round up to the next whole number.
Should the curtains touch the floor?
As a general rule, curtains should be long enough to touch the floor. The amount of drapery fabric reaching the floor depends on how you want the curtains to look once they are hung around the windows.
Are the curtains 72 inches long?
72 inch length curtains: Amazon.com.
Are the curtain measurements per panel?
Dimensions of Dunelm Ready Made Curtains Our ready made curtains are sold in pairs, and the size refers to each individual curtain. For example, a bundle of curtains labeled L 117cm XP 137cm will contain two curtains measuring each 117 cm by 137 cm.
