How To Replace Shower Curtain Rods | DoItYourself.com

You can update your bathroom by replacing the shower curtain rod with something new and trendy. Maybe it's time to remove the boring shower curtain rod that has been sitting in the same place all these years , but buying a new shower curtain rod can immediately change the look of your bathroom and update it without much expense.

Measurement area

Measure the old shower curtain rod and the area where it will go before you go to the store.

Choose style

Bathroom shower curtain rods are available in different colors and finishes, such as stainless steel, brushed nickel, or even solid colors. There are also simple vinyl wraps that can cover the old rod with shower curtain quickly and cheaply.These enclosures can also be removed and changed frequently.

Remove the old rod

If you have a shower curtain rod that is on a spring, simply remove one end from the wall, then slide the shower curtain and rings on.

Clean areas

Then use a clean cloth and general cleaning agent to clean the area before installing a new shower curtain rod. It is important that the area is clean and free of any remaining debris for the new rod to stay in place.

Unpack and place

Unpack the new rod and take one end in your hand, while holding the other end. Release the spring and let it adhere to 1 of the shower walls. At the same time, pull up the other end and place it on the other end. Spring rods can usually expand and adjust to the area as needed. They are usually packed under compression and expand when unpacked. They are easily twisted to make them longer or shorter.

Permanent stem modifications

If you have a permanent shower rod in place that is not a spring rod, it will take a little more effort to replace. Most permanent rods are installed on brackets that adhere to the wall panel. You can completely unscrew the old brackets and replace them.

Remove brackets

Unscrew the old brackets and install the new brackets, securing them with screws. You may need to patch old holes and drill new holes if the originals are stripped and cannot hold new material. Apply patching compound with a paint spatula. Let it dry completely before placing new screws.

Creative enclosures

If you chose to simply place a new sheath of a different color or design over the old rod, follow steps 1-3 and cover the old rod with the new sheath. Change it as often as you like.