You can cut a shower curtain liner.
Image Credit: Placebo365/iStock/GettyImages
A shower curtain liner that builds up in or out of the tub can be a safety hazard in more ways than one. Mildew and mildew will find a place in the damp folds of the oversized shower curtain liner. ideal for establishing colonies and spreading. It can also create a slippery surface that causes you to trip when entering or exiting a dripping shower. Cutting a shower curtain liner keeps water in the tub, reduces problems mildew odor and provides an overall cleaner and safer experience.
Preparing the liner for cutting
Remove the shower liner if it's already hanging. It's easier to work with it this way, and you won't double your efforts with an uneven cut. The shower curtain liner can also fall out of its rings on the rod hanger while you work on it.
If the shower liner is already stained with mold or is torn, you may want to replace it. A moldy shower curtain should be cleaned before you start trimming it. Sprinkle the affected area with baking soda and scrub with a sponge dipped in warm water. Rub it until the mildew comes off the liner and the stains are relatively clear. The liner of the shower curtain should be cleaned once a month.
Measure the shower curtain liner
Measure the shower curtain or check the measurements on the package. It should be raised a few inches off the floor to keep water in the shower stall or tub. The liner should not pool on the floor of the shower. tub or shower stall; it should fall just at the cusp.
Once you have determined the desired length of the shower curtain liner, fold the liner to the correct height and tape it down. This will provide an even line when it's time to cut.
If this is difficult, mark the shower curtain liner with a pencil or dry-erase marker. To test the material, mark an area that is not visible with the dry-erase marker to make sure it fits will erase easily. The ink from a dry erase marker should wipe cleanly from most vinyl shower liners.
Cut the shower curtain liner
Lay the shower curtain liner on a flat surface. A large bed or outdoor area works well. Make sure the liner is completely free of creases or creases. Otherwise, the fit may be uneven.
Using a sharp pair of scissors, slowly cut the liner. Move in small, deliberate motions across the liner so it doesn't end up with a jagged edge. Smooth the liner as you cut to ensure it stays even while you work.Then hang it on the hanging rod.
If the shower curtain liner has magnets along the bottom that cling to the tub, then cutting the bottom may eliminate this handy feature. Instead of cutting, use double-sided tape to shorten the liner. area with rubbing alcohol before applying adhesive to make sure it bonds.
