Shower curtains are a common thing in our bathroom, and to hang one you need to use a rod. Since most curtains are less heavy, lightweight rods are an optimal choice to support them.
There are several types of rods available these days to hold those beautiful curtains. Once you have chosen a suitable type that goes well with your bath environment, the only thing left to do is to install that rod.
So, let's discuss how to hang a shower curtain rod of different types.
Three Ways to Easily Install a Shower Curtain Rod
Depending on the type of curtain rod you have, the installation method is supposed to vary here and there.And so, it will be more convenient to talk about the installation of some common types of rods today.
Here we will go through three common rod types to complete the installation process. Enjoy!
Tools you will need:
Shower curtain rodRings and curtainStud finderDrywall anchorsDrillDrill bitsHardware supplied with rodPencilTape measureScrewdriverHammerHow to install tension rods?
The quickest and easiest shower curtain rods are tension rods. They're great for rental because there's virtually no hardware needed. Plus, the rods are easy to place between two walls.
However, you need to fit them properly. Or else there is a chance that these rods will fall out too often. Some even consider the rod to be harmful to drywall. too tight and leave no stud support.
And so, we are going to talk about a method which is to brace the rod in the right way.
Here's what to do!
You should use a tape measure and quickly take notes of the distance between two walls. When you buy the tension rod, make sure that its length is equal to this measurement plus a few inches.
Now you want to twist both ends in the opposite direction to open or extend the rod. To make the rod 1-2 inches longer than two walls in between, you can keep it aside after you've done this.
Now bring the curtain in and hold it by the top of a wall. This is where the tub aprons go underneath. You need to make sure the hem of the curtain is six inches below the edge of the bathtub.
Make adjustments to make the height that way. Now use a pencil and mark that defining mark on the wall. Use measurement tactics to copy that mark to the other wall, which is on the opposite side of your shower.
It's time to adjust the tension rod with the rings before proceeding with the installation. Now the edge bead is in the right place. You want to make sure that you hold one end of this rod to the mark on this side of the wall.
Then compress this rod and match it with the mark available on another side of the shower. As the rod moves into place, make any necessary adjustments. And the task should be done!
How to install a fixed rod?
Ok, now anyone who doesn't really like the idea of tension rods falling off every now and then would probably think of using fixed rods. These are more traditional and come with a range of designs individually.
In addition, the installation process is relatively simple. And the best part is that you don't have to worry about the rods moving out of place due to their fixed nature. Let's see how you install them.
Here's what to do!
Start by marking the location on both walls where you will attach the rods. Next you need a stud finder. Gradually place it over the spot where you marked earlier. there are studs behind the drywall.
Once you notice the device beeping or turning on, there is definitely a stud right behind the made mark. If there is no stud, you need to add a bracket.
If your walls are tiled, then it is necessary to pre-drill some holes and also insert a wall anchor. Make sure you don't skip it.
You must then screw these anchors into the holes. Bring the mounting hardware to secure carefully. You must use the screws to gently secure them into the wall anchors.
Follow up with the rod to install it. But before that, you want to slide rings through the rod. Now mount the rod in the holes. And you're ready to put those curtains up and enjoy the final look!
How to install a curved rod?
Mainly in luxury hotels and villas for rent, you will find the curved rod in their shower space which looks super aesthetically pleasing. These are, of course, fancier and command quite a premium price.
Using these rods for a bathtub will make the whole space look even more huge. There is also less curtain lining hassle here. You can also enjoy crescent or curved designs in different variations. Let's talk about installation of an adjustable curved shower rod, as they are more common in homes and less expensive. Plus, installation is also easy.
Here's what to do!
You don't really need to go and find new holes as that will complicate the process somewhat. Also, those old holes will need to be repaired, filled and painted. And that would be too much of a task for a simple rod hanging project .
Start using a screwdriver to remove the screws from the old rod. Now you need the bracket as a template. Hold it against the wall over the top hole of this bracket. old outermost or top mounting hole. Once you have leveled, go mark the location of the bottom hole.
For the new bottom holes, install the plastic wall anchors next. You also want to get rid of those old, mangled plastic wall anchors.
Now, if you're having trouble because the previous mounting holes were installed horizontally, here's what to do. You need to consider which screw hole is furthest from the tub. This will be the top hole for the new one. bracket. If a new bracket does not cover the old hole, a patch is needed. You may also need to touch up the wall with paint.
As soon as the anchors are in place, firmly fix the support of the new rod to the wall. Use the screws provided for this.
Follow the manufacturer's instructions for clipping one end of the rod into the holder. Usually a spring clip is used here. Also, you may need a screw-on clip instead of the spring clips in some case. Whichever method you should follow according to the manufacturer, use it to securely attach the rod to the bracket.
Now it's time to extend the adjustable rod. Make it reach the necessary and correct length, and finally choose another end. Place the other end inside the wall bracket. Then put the curtain and the liner. And you're ready to leave the toilet with a curved shower rod hanging behind.
Conclude
And that was some easy-to-follow instructions on how to install a shower curtain rod, depending on the type you have. Hope the guide was helpful and you can proceed without any problems.
Curtains are an integral part of bathroom decor. And without a good shower rod installation, it will always be a step backwards to be perfect. So, take care and do the job. Good luck! that this guide will be useful for everyone.
