By using them, irons can accumulate stains that become firmly embedded in the soleplate and more specifically, brown marks resulting from ironing. In this article we share with you the different methods to disintegrate them without going through the box: chemicals.
Summary
How to remove brown stains from an iron? -White vinegar to remove brown stains from the iron-Laundry detergent to remove stains from the iron-Dishwashing liquid to remove burn marks from the iron-Hydrogen peroxide to clean an iron-Lemon juice and baking soda to remove brown marks from the iron-Candle wax to clean the iron-Toothpaste to clean the ironIf you notice burn marks during ironing or peculiar smells emanating from the iron, it may be time to clean it. These stains take the form of brown marks on the soles that you can easily remove with the tips that we present to you in this article.
Iron – Source: spm
How to remove brown stains from an iron?
Brown marks can stain clothes when ironing. To recover your device, the first reflex to adopt is to unplug the device before using the following techniques.
Brown stains on iron soleplate – Source: spm
–White vinegar to remove brown stains from the iron
If you are dealing with particularly encrusted burn marks on the soleplate of the iron, white vinegar is the product to privilege. Take a soft cloth soaked in white vinegar and gently rub it against the burnt sole until the marks have completely disappeared. Finish with a damp cloth application.
If that doesn't seem to work, dissolve coarse salt in warm white vinegar, stir, then soak a microfiber cloth in the solution. Then rub the sole until you notice the complete disappearance of the stains. Finally, rinse with a clean cloth dampened with clear water.
–Laundry detergent to remove iron stains
This product can be a good alternative if your iron has a non-stick soleplate. Dilute two drops of the detergent in a bowl of warm water, soak a microfiber cloth in it and rub it against the soleplate. Then dry with a dry cloth.
You can also prepare your own natural detergent to clean all the surfaces in your home.
–Dishwashing liquid to remove scorch marks on the iron
If the brown marks cover the holes of the iron, dilute some dishwashing liquid in water then wash - Soak cotton swabs in it. On a cool iron, rub the stained area and soiled vents. Rinse and then let the device air dry immediately after rinsing with clear water.
Also, be aware that you can replace the dishwashing liquid with black soap or grated Marseille soap. The latter remains a product that can serve more than one purpose.
–Hydrogen peroxide to clean an iron
Thanks to the stain-removing power of hydrogen peroxide, you can remove brown marks effortlessly. All you have to do is put some on an ironing board and then use your appliance on it until the stains disappear.
–Lemon juice and baking soda to remove brown iron marks
Baking soda – Source: spm
The acidity of lemon and the abrasiveness of baking soda combine here for an effective cleaning of your iron. For this, form a paste with a little lemon juice and sodium bicarbonate then coat the stained area. Let the product act on a cold iron for 5 minutes then rub it gently until the soleplate is completely cleaned; you can help yourself with a toothbrush for this purpose. Then use a damp cloth to wipe off any remaining paste and allow to dry.
–Candle wax to clean the iron
Although a candle stain is quite compromising for our tablecloth or carpet, the same is not true for the cleaning our irons. And for good reason, candle wax works well against stubborn iron soleplate stains. Start by adjusting the iron to the lowest setting, being careful not to touch the soleplate, then rub the candle on the brown marks. Wearing oven gloves, rub the stained areas with a thick cloth.
–Toothpaste to clean the iron
As surprising as it may seem, toothpaste can indeed be used to disintegrate brown stains from iron plate. Take a paper towel soaked in the paste and rub it against the burn marks. Focus only on the stained areas before wiping with a microfiber cloth. Also be careful not to let the product enter the steam vents, in which case, fill the water tank with distilled water and then place your iron upright on a used towel. Turn the device on, let it sit on the ironing board for 5 minutes, then remove excess toothpaste by holding the device button down for 20 seconds. Then wipe with a cloth soaked in cold water. Repeat the operation if necessary.
So many tricks to use to restore the initial efficiency of your iron. In the meantime, you can take the opportunity to de-wrinkle your clothes without using it!
Read also Why should the toilet seat be closed before flushing?
Sponsored contentMore articlesEssential oils to use in case of hypertension
Yellow white chairs? The trick to whiten them and make them look like new
Why is it essential to wash rice before cooking it?
The genius trick for cleaning a mattress and leaving a nice scent
Here's how to remove facial hair with baking soda
Here's how to unlock a supermarket shopping cart without coins or tokens
Pouring vinegar over orange zest solves one of the biggest problems in the house
The brilliant trick to make a dirty and dirt-encrusted oven look like new
Here's how to make a cloth that removes dust from the house
